限位开关就是用以限定机械设备的运动****限位置的电气开关。限位开关有接触式的和非接触式的。接触式的比较直观，机械设备的运动部件上，安装上行程开关，与其相对运动的固*上安装****限位置的挡块，或者是相反安装位置。当行程开关的机械触头碰上挡块时，切断了（或改变了）控制电路，机械就停止运行或改变运行。由于机械的惯性运动，这种行程开关有一定的“超行程”以保护开关不受损坏。非接触式的形式很多，常见的有干簧管、光电式、感应式等，这几种形式在电梯中都能够见到。当然还有更多的****形式。限位开关是一种常用的小电流主令电器。利用生产机械运动部件的碰撞使其触头动作来实现接通或分断控制电路，达到一定的控制目的。通常，这类开关被用来限制机械运动的位置或行程，使运动机械按一*置或行程自动停止、反向运动、变速运动或自动往返运动等。在电气控制系统中，限位开关的作用是实现顺序控制、*控制和位置状态的检测。用于控制机械设备的行程及限位保护。构造：由操作头、触点系统和外壳组成。

------------------------------------------------------------------------------------------------

v  陕西欣鸿然自动化设备有限公司

v  联系人:宁超         热  线：029-83338136

v  手 机：15339052544  *1293858601       

v  邮箱:1293858601@** 传真:029-83561013 

------------------------------------------------------------------------------------------------

Limit switch working limit switch and limit switch, limit switch is used to give the work mechani* of action in place signal. Limit switch is to prevent the agency beyond the scope of design and accident. Work limit switches are installed in the *ition of the mechani* to change the conditi*witch, signal is given, for other related acti*. Limit switch installed in the mos*stal moveme*f mechani*, to protect the mechani* of action is too large there is damaged.

The main part of the switch is com*ed of the following materials

Mark of part*aterials

Contact Au corrosion resistance is superior, for *all load. Because of its soft texture (Vivtorinox hardness HV25 ~ 65), it is easy to adhesion (contact adhesive), and in the contact force under the condition of large contact easy to sag.

Alloy of gold, silver, 10% silver gold alloy AuAg 90% corrosion resistance is very good, hardness is HV30 ~ 90, higher than the gold, so it is widely used in *all load switch.

Platinum, gold, silver, 69% gold, 25% silver alloy PGS, 6% platinum alloy, corrosion resistance is very good, hardness is also the same with gold and silver alloy, widely used in *all load switch. Known as the "No. 1 alloy".

Silver palladium alloy AgPd, good corrosion resistance, but it is easy to adsorb organic gas generation polymer. 50% silver, 50% case of palladium, hardness is HV100 ~ 200.

Silver Ag electrical conductivity, thermal conductivity is one of the largest in the metal. Although the exhibit lower contact resistance, but the drawback*easy to generate sulfide film in sulfide gases in the environment, in the *all load area is easy to produce bad. Hardness is HV25 ~ 45. For more general load switch.

Silver, nickel alloy AgNi 90% silver, 10% silver, nickel and silver nickel alloy electric conductivity in close, arc resistance, excelle*esistance to melting. Hardness is HV65 ~ 115.

Silver, indium, tin alloy AgInSn hardness, high melting point, excellent arc resistance, not easy to melt or transfer.

The movable spring, the movable plate spring with phosphor bronze C5210 rolling resistance, fatigue resistance and corrosion resistance. H*e carried out annealing treatment. If the spring critical value (Kb0.075) of C5210-H i*ore than 40kgf/mm2, C5210-EH i*ore than 47kgf/mm2, the lower, are widely used in the *all micro switch.

VXF31.25  VXF31.39  VXF31.40  VXF31.50  VXF31.65  VXF31.80  VXF31.90 VXF31.91 

VXF31.92  VXF40.100-124  VXF40.125-200  VXF40.150-300  VXF40.15-1.9  VXF40.15-3 

VXF40.25-5  VXF40.25-7.5  VXF40.40-12  VXF40.40-19  VXF40.50-31  VXF40.65-49 

VXF40.80-78  VXF41.25  VXF41.25(4)  VXF41.40  VXF41.40(4)  VXF41.49  VXF41.49(4) 

VXF41.50  VXF41.50(4)  VXF41.65  VXF41.65(4)  VXF41.80  VXF41.80(4) 

VXF41.90  VXF41.90(4)  VXF41.91  VXF41.91(4)  VXF41.92  VXF41.92(4)   

NHR-M41-27/X-0/X-A    NHR-M41-27/X-0/X-D

      NHR-M41-28/X-0/X-A    NHR-M41-28/X-0/X-D

      NHR-M41-29/X-0/X-A    NHR-M41-29/X-0/X-D

      NHR-M41-30/X-0/X-A    NHR-M41-30/X-0/X-D

      NHR-M41-31/X-0/X-A    NHR-M41-31/X-0/X-D

      NHR-M41-32/X-0/X-A    NHR-M41-32/X-0/X-D

      NHR-M41-33/X-0/X-A    NHR-M41-33/X-0/X-D

      NHR-M41-34/X-0/X-A    NHR-M41-34/X-0/X-D

      NHR-M41-35/X-0/X-A    NHR-M41-35/X-0/X-D

      NHR-M41-25/X-0/0-A    NHR-M41-25/X-0/0-D

      NHR-M41-26/X-0/0-A    NHR-M41-26/X-0/0-D

      NHR-M41-27/X-0/0-A    NHR-M41-27/X-0/0-D

      NHR-M41-28/X-0/0-A    NHR-M41-28/X-0/0-D

      NHR-M41-29/X-0/0-A    NHR-M41-29/X-0/0-D

      NHR-M41-30/X-0/0-A    NHR-M41-30/X-0/0-D

      NHR-M41-31/X-0/0-A    NHR-M41-31/X-0/0-D

      NHR-M41-32/X-0/0-A    NHR-M41-32/X-0/0-D

      NHR-M41-33/X-0/0-A    NHR-M41-33/X-0/0-D

      NHR-M41-34/X-0/0-A    NHR-M41-34/X-0/0-D

      NHR-M41-35/X-0/0-A    NHR-M41-35/X-0/0-D

      NHR-M41-25/X-0/1-A    NHR-M41-25/X-0/1-D
从命而利君谓之顺，从命而不利君谓之谄；逆命而利君谓之忠，逆命而不利君 谓之篡；不恤君之荣辱，不恤国之臧否，*以持禄养交而已耳，谓之*。 君有过谋过事，将危*陨社稷之惧也；大臣父兄，有能进言于君，用则可，不用 则去，谓之谏；有能进言于君，用则可，不用则死，谓之争；有能比知同力，率群 臣百吏而相与强君挢君，君虽不安，不能不听，遂以解国之大患，除国之大害，成 于尊君安国，谓之辅；有能*君之命，窃君之重，反君之事，以安国之危，除君之 辱，功伐足以成国之大利，谓之拂。故谏争辅拂之人，社稷之臣也，国君之宝也， 明君之所尊厚也，而闇主惑君以为己贼也。故明君之所赏，闇君之所罚也；闇君之 所赏，明君之所杀也。伊尹箕子可谓谏矣，比干子胥可谓争矣，平原君之于赵可谓 辅矣，信陵君之于魏可谓拂矣。传曰：“从道不从君。”此之谓也。故正义之臣设， 则朝廷不颇；谏争辅拂之人信，则君过不远；爪牙之士施，则仇雠不作；边境之臣 处，则疆垂不丧，故明主好同而闇主好独，明主尚贤使能而飨其盛，闇主妒贤畏能 而灭其功，罚其忠，赏其贼，夫是之谓至闇，桀纣所以灭也。