在安装时，减速机设备，严禁用铁锤等击打，****轴向力或径向力过大损坏轴承或齿轮。一定要将安装螺栓旋紧之后再旋紧紧力螺栓。

At the time of installation， it is strictly prohibited to use a hammer， such as a hammer，减速机， so as to prevent the axial or radial force from damaging the bearing or gear. It is necessary to tighten the bolt when the bolt is tightened.

在运转200~300小时后，应进行换油，在以后的使用中应定期检查油的质量，对于混入杂质或变质的油须及时更换。一般情况下，减速机设备，对于长期连续工作的减速机，按运行5000小时或每年一次更换新油.

After running for 200~300 hours， the first oil change should be done. The quality of the oil should be checked regularly in later use， and the oil mixed with impurities or deterioration must be changed in time. In general， for a long-term continuous working reducer， new oil is replaced at 5000 hours or once a year.

减速机动力源运转速度 根据在不同转速条件下对减速机的试验表明，减速机设备，随着减速机输入转速的增加，噪声也将*。

The experimental study on the structural form of the reducer box shows that the cylindrical box is advantageous to vibration reduction. Under the same other conditi*， the noise level of the cylindrical box is 5 dB lower than that of other types of box on average.