装夹过程及工作原理。钳台底座在设备工作台上固定好后，先调整可调钳口座在钳体底座上的位置，辽宁联接机，确保装夹行程内能有效对工件进行装夹；再将待加工产品置于柔性虎钳的两个钳口之间。

Clamping process and working principle. When the clamping platform is fixed on the equipment worktable，联接机谁家好， the of the adjustable jaw seat on the base of the clamp body is adjusted first，联接机产品， so as to ensure that the workpiece can be clamped effectively in the clamping stroke， and then the processed product is placed between the two jaw openings of the flexible vice.

凡是在轴毂联接中不用键、花键或销时的联接，统称为无键联接。无键联接中我们介绍两个常用的型面联接和过盈配合联接。

The connection of no key， spline or pin in the hub connection i*alled the keyles*onnection. In keyless joins， we two commonly used type face joins and interference fit connecti*.