东莞市台铭光电科技有限公司
主营：发光二管led灯珠 红外线发射管 贴片led 直插led uv紫外线
F4MM圆头无边高8.0MM超高灯体高胶体LED一体灯珠
￥0.01元/件
中国 广东 东莞
来电请说明在第一枪看到，谢谢！
产品属性
- 品牌:
- 其他
- 结构:
- 全环氧包封
- 半导体材料:
- 磷砷化镓
- 发光颜色:
- 其他
- 型号:
- TM-L03W-E
3mm直插led红光,3mm直插led绿光,3mm直插led蓝光,3mm直插led黄光,3mm直插led黄绿光,3mm直插led橙光,指示灯*灯珠
- 产品型号：TM-L03W-E
- 应用范围：照明、指示、背光等
- 产品描述：台铭直插式LED,体积小,高亮度,能耗低,应用于照明,背光等领域。
产品介绍
注：亮度、角度、色温、紫光波段均可按客户要求做货。
|
Type 规格/型号 |
Emitting Color 颜色 |
Material 原材料 |
View Angle 发光角度 |
VF(V) 电压 |
IV (MCD) 亮度 |
WL(nm) 波长 |
IF(MA） 电流 |
|||
| Typ | Max | Min | Typ | Min | Max | |||||
|
TM-L03R-E （红光） |
Red | AlGaInP | 30° | 1.8 | 2.4 | 2000 | 4000 | 620 | 630 | 20MA |
|
TM-L03Y-E （黄光） |
Yellow | AlGaInP | 30° | 1.8 | 2.4 | 300 | 600 | 585 | 595 | 20MA |
|
TM-L03O-E （黄绿） |
Yellow Green | AlGaInP | 30° | 1.8 | 2.4 | 50 | 100 | 565 | 575 | 20MA |
|
TM-L03O-E （橙光） |
orange | AlGaInP | 30° | 1.8 | 2.4 | 300 | 600 | 600 | 610 | 20MA |
|
TM-L3CG-E （翠绿） |
Green | InGaN/GaN | 30° | 2.8 | 3.4 | 1200 | 8000 | 520 | 530 | 20MA |
|
TM-L3B-E （蓝光） |
Blue | InGaN/GaN | 30° | 2.8 | 3.4 | 300 | 500 | 460 | 475 | 20MA |
|
TM-L3UV365-E （紫光） |
Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 6 | 8 | 365 | 370 | 20MA |
|
TM-L03UV370-E （紫光） |
Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 10 | 13 | 370 | 375 | 20MA |
|
TM-L3UV380-E （紫光） |
Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 14 | 18 | 380 | 385 | 20MA |
|
TM-L03UV400-E （紫光） |
Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 60 | 70 | 395 | 400 | 20MA |
|
TM-L03UV405-E （紫光） |
Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 70 | 80 | 400 | 405 | 20MA |
|
TM-L03UV410-E （紫光） |
Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 80 | 90 | 405 | 410 | 20MA |
|
TM-L3NB55-E （白光） |
White | InGaN/GaN | 30° | 2.8 | --- | 6000 | --- | 5500 | 6000 | 20MA |
|
TM-L3ZB65-E （白光） |
White | InGaN/GaN | 45° | 2.8 | --- | 6000 | --- | 6500 | 7000 | 20MA |
|
TM-L3LB80-E （白光） |
White | InGaN/GaN | 30° | 2.8 | --- | 6000 | --- | 2500 | 10000 | 20MA |
Supporter shaping：
Shaping of the supporter must be conducted before welding. While shaping, the
bending *ition of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, *oid multiple bending on the same *ition。 Please
choose the
appropriate apparatus to fixate the supporter in order to *oid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB boa*hould be
strictly matched with the pin interval of the product when assembling the product.
bending *ition of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, *oid multiple bending on the same *ition。 Please
choose the
appropriate apparatus to fixate the supporter in order to *oid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB boa*hould be
strictly matched with the pin interval of the product when assembling the product.
内容声明：第一枪网为第三方互联网信息服务提供者，第一枪（含网站、微信、百家号等）所展示的产品/服务的标题、价格、详情等信息内容系由卖家发布，其真实性、准确性和合法性均由卖家负责，第一枪网概不负责，亦不负任何法律责任。第一枪网提醒您选择产品/服务前注意谨慎核实，如您对产品/服务的标题、价格、详情等任何信息有任何疑问的，请与卖家沟通确认；如您发现有任何违法/侵权信息，请立即向第一枪网举报并提供有效线索至b2b@dyq.cn