瑞柯供应FT-300系列粉末电阻率测试仪
FT-300系列粉末电阻率测试仪 （经济型）
FT-300 Series powder resistivity tester (economy type)
一． 概述Overview：
采用四端测量法适用于锂电池材料、石墨烯、石墨类、碳素粉末、焦化、石化、粉末冶金、高等院校、科研部门，是检验和分析导电粉末样品质量的一种重要的工具。本仪器采用4.3吋大液晶屏幕显示，同时显示电阻值、电阻率、电导率值、温度、压强值、单位自动换算，标配FT-01A手动粉末测量装置.薄膜按键开关面板，操作简单，*，符合*工学操作规范. 提供中文或英文两种语言操作界
adopts the method of four terminal is suitable for use in carbon powder plant coking plant petrochemical plant powder metallurgy factory instituti* of higher learning scientific research department It is an important tool for testing and yzing the quality of powder samples. This instrument adopts the 4.3 -inch LCD screen display also showed resistance resistivity conductivity value temperature pressure autotic conversion unit Configure nual powder measuring device. Use membrane switche*nel the operation is durable be in accordance with hun body ergonomic operation norms. Provide Operating world in Chinese or English two languages
二．标准满足standard：
YST 587.6-2006 炭阳****用煅后焦检测方法第6部分 粉末电阻率的测定；标配手动粉末测试装置测试粉末时可以通过装置获得粉末压实后高度、直径、压强等数据，自动计算出所需数据.能方便解决粉末及颗粒物料电阻、电阻率及电导率测量需求，经济实惠，功能突出，设计合理，是粉末行业理想之测试仪器.
Meet YST 587.6 2006 carbon anode with the calcined petroleum coke part 6 powder resistivity test method; Powder resistivity tester configuration nual powder tes*vice test powder can be gained through the device of powder compaction after data such as heigh*ameter pressure autotically calculate the required data. To solve the powder and granular terials resistance electrical resistivity and conductivity measureme*equirements economical and practical outstanding features reasonable design is the ideal powder industry test instruments.
三．型号及技术指标Models and technical indicators：
规型号 model
FT-300I
FT-300II
FT-300III
FT-300Ⅳ
1.电阻resistance
10-7～2×107Ω
10-6～2×106Ω
10-5～2×106Ω
10-4～1×105Ω
2.电阻率范围Resistivity
10-7～2×107Ω-cm
10-6～2×106Ω-cm
10-5～2×106Ω-cm
10-4～1×105Ω-cm
3.电导率Conductivity
5×10-7～107s/cm
5×10-6～106s/cm
5×10-6～105s/cm
5×10-5～104s/cm
4.测试电流范围 current
1μA，10μA，100μA，1mA，10mA，1000mA
1μA，10μA，100μA，1mA，10mA，
5.测量电压量程Voltage
测量电压量程 voltage：2mV 20mV 200mV 2V
测量精度Accuracy±（0.1%读数）
分辨率 Resolution： 0.1uV 1uV 10uV 100uV
6.电流精度Current
±0.1%Accuracy
±0.2% Accuracy
±0.2% Accuracy
±0.3% Accuracy
7.电阻精度Resistance Accuracy
≤0.3%标准电阻resistance
≤0.3%标准电阻resistance
≤0.3%标准电阻resistance
≤0.5%标准电阻 standard resistance
8.显示读数display
液晶显示：电阻值、电阻率、电导率值、温度、压强值、单位自动换算、横截面、高度，超上下限警报
LCD: resistance resistivity conductivity temperature pressure value the unit autotically conversion cross-section height，Super and upper limit&nb*larm
9.测试方式Test mode
四端测量法Four-terminal measurement method
10.传感器压力Pressure Sensors
200kg；(其他规可以定制)
(Other specificati* can be customized)
11.粉末测量装置
Powder measuring device
模具Mold：内径inner diameter 10mm； 20mm（选购） height: 25mm
加压方式：手动液压加压测量 pressure: nual hydraulic pressure / autotic compression mode (purchase).
12.工作电源power supply
输入: AC 220V±10% 50Hz 功 耗Power c*umption：13.外形尺寸/dimensi*
主机Mainframe：约L330mm*D350mm*H120mm ;手动装置about：约H450mm*L200mm*D120mm
14.净重量/Net Weight
约35kg
About 35kg
15. 标配外选购Others buy
a.标准校准电阻1-5个；b.PC软件一套；c.电脑和打印机依据客户要求配置；d.计量1份 ，e. 高度校准塞规1个
a. Standard calibration resistor 1-5. b.PC software 1 set
c*puters and printers based on customer configuration requirements. d. Measurement certificate 1.
e. Height calibrated plu*auge 1 pcs
