美国杜邦POM 500T BK、POM 500T NC、POM 500TE NC、POM 500TL NC、POM 510GR NC、POM 511DP BK
Polyoxy polyformaldehyde (POM) is also known as Saigang and Special Steel. It is synthesized from formaldehyde and other raw materials. POM-H (polyformaldehyde homopolymer) and POM-K (polyformaldehyde copolymer) are high density and high crystallinity thermoplastic engineering plastics. It has good physical, mechanical and chemical properties, especially excellent friction resistance. Polyformaldehyde is a linear polymer without side chain, high density and high crystallinity. It has excellent comprehensive properties. Polyformaldehyde is a hard and compact material with *ooth surface and luster. It is yellowish or white and can be used for a long time in the temperature range of - 40 - 100 degree C. Its wear resistance and self-lubrication are also superior to most engineering plastics. It also has good oil resistance and peroxide resistance. It is very acid-resistant, alkali-resistant and ultr*iolet radiation-resistant. POM is a crystalline plastic with *iou*elting point. Once the melting point is reached, the melt viscosity decreases rapidly. When the temperature exceeds a certain limit or the melt is heated too long, it will cause decom*ition. POM has good comprehensive properties, and is the hardest in thermoplastics. It is one of the most similar varieties of plastic materials to metal in mechanical properties. Its tensile strength, bending strength, fatigue strength, wear resistance and electrical properties are excellent. It can be used between - 40 degrees and 100 degrees for a long time. According to the structure of molecular chain, polyformaldehyde can be divided i* homopolymer and copolymer formaldehyde. The former has high density, crystallinity and melting point, but poor thermal stability, narrow processing temperature (10 degrees), and slightly low stability to acid and alkali. The latter has low density, crystallinity and melting point, but good thermal stability and is not easy to decom*e. Strong acid corrosion, poor weather resistance, poor adhesion, thermal decom*ition and softening temperature close, oxygen limiting index is *all. They are widely used in automotive industry, electronics, electrical appliance*echanical equipment and so on. It can also be used as water tap, with low friction coefficient and good geometric stability, especially suitable for makin*ears and bearings. Because of its high temperature resistance, it is also used in pipeline devices (pipeline valves, pump shells), lawn equipment and so on. POM product proces*onditi* drying treatment: If the material is stored in a dry environment, usually do not need drying treatment. Melting temperature: Homopolymer material 190 ~ 230 C, copolymer material 190 ~ 210 C. Temperature of die: 80 ~ 105 C. In order to reduce the shrinkage after forming, higher die temperature can be used. Injection pressure: 700 ~ 1200bar injecti*peed: medium or high injecti*peed. Runner and gate: Any type of gate can be used. If a tunnel gate is used, a shorter type is preferred. Homopolymer material is recommended to use hot nozzle runner. For copolymer materials, both internal heat runners and external heat runner*an be used. Chemical and Physical Properties of POM Polyformaldehyde: POM is a tough and elastic material with good creep resistance, geometric stability and impact resistance even at low temperatures. POM has both homopolymer and copolymer materials. Homopolymer materials h*e good ductility and fatigue strength, but they are not easy to process. Copolymer materials h*e good thermal stability, chemical stability and easy processing. Homopolymer materials and copolymer materials are crystalline materials and are not easy to absorb water. The high crystallinity of POM results in a high shrinkage rate of up to 2%~3.5%. There are different shrinkage rates for differe*einforced materials. POM is unique in that its toughness and hardness are close to metals, and its high temperature and wear resistance are excellent. It can be used as wear-resistant parts such as gears. It i*rystalline thermoplastics with *iou*elting poi*f 165-175 C, and its properties are the closest to metals. It is generally called plastic steel with advantages 1, high mechanical strength and rigidity 2, the highest fatigue strength 3, environmental resistance and organic solve*esistance. Good performance 4, strong repetitive impact resistance 5, wide application temperature range (-40 ~120 C) 6, good electrical properties 7, good recovery 8, self-lubrication, good wear resistance 9, advantages and disadvantages of dimensional stability 1, easy thermal decom*ition if processing at high temperature for a long time 2, no self-extinguishin*acid resistance 4, forming shrinkage of large-pur*e electronic appliances: washing machine, juice machine parts Timer Component Automobile: Handlebar Parts, Electric Window Parts Industrial Part*echanical Parts, Gears, Handles, Toys, Screws
聚甲醛学名聚氧化聚甲醛(简称POM) 又称赛钢、特钢。它是以甲醛等为原料聚合所得。POM-H(聚甲醛均聚物),POM-K(聚甲醛共聚物)是高密度、高结晶度的热塑性工程塑料。具有良好的物理、机械和化学性能,尤其是有优异的耐摩擦性能。 聚甲醛是一种没有没有侧链,高密度,高结晶性的线性聚合物,具有优异的综合性能。 聚甲醛是一种表面光滑,有光泽的硬而致密的材料,淡黄或白色,可在-40- 100°C温度范围内长期使用。它的*性和自润滑性也比绝大多数工程塑料优越,又有良好的耐油,耐过氧化物性能。很不耐酸,不耐强碱和不耐紫外线的辐射。应用范围 POM属结晶性塑料,熔点明显,一旦达到熔点,熔体粘度迅速下降。当温度超过一定限度或熔体受热时间过长,会引起分解。 POM具有较好的综合性能,在热塑性塑料中是坚硬的,是塑料材料中力学性能接近金属的品种之一,其*张强度、弯曲强度、耐*强度,*性和电性都十分优良,可在-40度--100度之间长期使用。 化学性质 按分子链结构不同,聚甲醛可分为均聚甲醛和共聚甲醛,前者密度、结晶度、熔点都高,但是热稳定性差,加工温度窄(10度),对酸堿的稳定性略低;后者密度、结晶度、熔点较低,但热稳定性好,不易分解,加工温度宽(50度) 不足之处在于:由受强酸腐蚀,耐侯差,粘合性差,热分解与软化温度接近,限氧指数小。它们广泛用于汽车工业,电子电器,机械设备等。还可以做水*、具有很低的摩擦系数和很好的几何稳定性,特别适合于制作齿轮和轴承。由于它还具有耐高温特性,因此还用于管道器件(管道阀门、泵壳体),草坪设备等。 POM产品 工艺条件 干燥处理:如果材料储存在干燥环境中,通常不需要干燥处理。 熔化温度:均聚物材料为190~230℃;共聚物材料为190~210℃。 模具温度:80~105℃。为了减小成型后收缩率可选用高一些的模具温度。 注射压力:700~1200bar 注射速度:中等或偏高的注射速度。 流道和浇口:可以使用任何类型的浇口。如果使用隧道形浇口,则好使用较短的类型。对于均聚物材料建议使用热注嘴流道。对于共聚物材料既可使用内部的热流道也可使用外部热流道。 POM 聚甲醛的化学和物理特性: POM是一种坚韧有弹性的材料,即使在低温下仍有很好的*蠕变特性、几何稳定性和*冲击特性。POM既有均聚物材料也有共聚物材料。均聚物材料具有很好的延展强度、**强度,但不易于加工。共聚物材料有很好的热稳定性、化学稳定性并且易于加工。无论均聚物材料还是共聚物材料,都是结晶性材料并且不易吸收水分。POM的高结晶程度导致它有相当高的收缩率,可高达到2%~3.5%。对于各种不同的增强型材料有不同的收缩率。 POM与众不同的地方就是其韧性和硬度都比较接近金属,耐高温*性也比较****,可做齿轮等*件性质:为结晶性热可塑性塑料,具明显熔点165~175℃,性质接近金属,一般称其为塑钢 优点 1、具高机械强度和刚性2、高的*强度3、环境抵*性、耐*性佳4、耐反覆冲击性强5、广泛的使用温度范围(-40℃~120℃)6、良好的电气性质7、复原性良好8、具自已润滑性、*性良好9、尺寸安定性优 缺点 1、加工过程若长时间高温下易起热分解2、无自熄性3、*酸性差4、成形收缩率大 用途 电子电器:洗衣机、果汁机零件、定时器组件 汽车: 车把零件、电动窗零件 工业零件:机械零件、齿轮、把手、玩具、螺杆
成立于 1802 年的杜邦公司是一家科学企业,凭借*的产品、材料和服务,为全球市场提供级的科学和工程能力,协助应对各种全球性挑战,包括为全球各地的人们提供充 足健康的食物、减少对化石燃料的依赖,以及保护生命与环境。让全球各地的人们生活得更美好、更安全和更健康。杜邦公司的业务遍及全球90多个*和地区, 以广泛的*产品和服务涉及农业与食品、楼宇与建筑、通讯和交通、能源与生物应用科技等众多领域。
杜邦科学探索的历史悠久,并成就无数*。2011年,公司研发投入为20亿美元,拥有9500多名科学家和技术人员以及全球超过150家研发设施。目 前,杜邦公司在全拥有21000多项有效专利,以及超过15000项专利应用。与以往任何时候相比,杜邦如今在更多的地区与更多的人开展合作。我们相 信,"包容性*"是解决人类所面临的大挑战的途径:通过与学者、、企业和*的合作,我们能够找到新的更好的方法,为不断增长的人口提供食 物、能源和防护。
杜邦公司与中国的生意往来可追溯到清朝(1863年)。跟随中国改革开放的步伐,杜邦公司于1984年在北京设立办事处,并于1988年在深圳注册成立" 杜邦中国集团有限公司",成为早开展对华的跨国企业之一。随着中国经济进入到经济结构战略性调整和区域平衡发展的关键时期,杜邦公司于2012年在 成都设立西部地区****分公司,与合作伙伴协力提升本地化*,支持中国西部大开发战略。经过29年的努力,杜邦已在中国建立了50余家独资及合资企业,拥 有员工约7500人,并将许多地区业务总部移至中国大陆。
值得一提的是,于2005年正式投入使用的杜邦中国研发中心是杜邦公司在美国本土以外设立的第三大公司级的综合性科研机构。该中心致力于为中国本地、亚太 地区和全球市场提供技术*支持与合作平台,并于2012年进行了二期扩建工程,着眼光伏解决方案、生物基材料、汽车材料等领域的新材料应用开发及检测能 力。完工后中心规模与科技人员数量从原有的250名左右增至450名。此外,为了进一步连接中国本地市场的研发需求与杜邦全球*资源,杜邦公司还计划于 2013年起在上海和西部地区各设立一*技术中心,从而更*****动地区协作,提升响应本地需求的速度。
杜邦公司的业务和科学实力均契合了中国的长期发展方向,这些方向包括:对农业商品的更大需求、遏制环境恶化、和谐社会建设和人口结构变化。我们十分欣喜地 看到其中蕴含着诸多与他人进行合作的契机。杜邦愿与中国各界有志之士一道在,融合多方巧思*的力量,实践我们支持中国经济社会可持续发展的长期承诺,为 创建更美好、更安全和更健康的未来做出贡献。