泓格模块M-7018Z是10路高保护热电偶输入板
The I-7018/M-7018 is an 8-channel Analog Input module that provides current and voltage input, as well as thermocouple input. The I-7018R/M-7018R is an upgraded version of the I-7018/M-7018 that includes an extremely high-quality protection mechani* where the overvoltage protection can be as high as 240 Vrms. The I-7018R/M-7018R i*ore suitable for critically harsh environments, and the newly-added open thermocouple detection feature makes the I-7018R/M-7018R more attractive than ever.
The I-7018/M-7018/I-7018R/M-7018R also features 4 kV ESD protection and 3000 VDC i*a-module isolation. The specificati* for the M-7018 and M-7018R are the same as the I-7018 and I-7018R, but provide additional support for the Modbus RTU protocol as well as the DCON protocol.
规格
输入通道：10路差动
电压范围：&plu*n;15 mV，&plu*n;50 mV，&plu*n;100 mV，&plu*n;500 mV，&plu*n;1 V，&plu*n;2.5 V
电流范围：&plu*n;20 mA，0~20 mA，4~20 mA（外接125 Ω电阻）
热电偶类型：J，K，T，E，R，S，B，N，C，L，M，LDIN43710
分辨率：16 位
采样速率：10 次/秒
*度：&plu*n;0.1%
带宽：15.7 Hz
零点*移：&plu*n;0.5 μV/℃
满量程*移：&plu*n;25 ppm/℃
共模*比：150 dB min
差模*比：100 dB
输入阻*：20 MΩ
热电偶断线检测：有
单通道配置：可以
过压保护：240 Vrms
隔离保护：3000 VDC
电源
电源电压：+10 ~ +30 VDC
电源功耗：1.0 W
环境规格
工作温度：-25 ~ 75 ℃
存储温度：-40 ~ 85 ℃
相对湿度：5 ~ 90%，无冷凝
特殊功能
双看门狗：有
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Note: For highly-accurate thermocouple measurement, ICP DAS recommends selecting the I-7018Z/I-7019Z module, which features automatic cold-junction compensation for each channel, ensuring c*istent and stable temperature output. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Models | I-7018 | I-7018R | M-7018 | M-7018R |
| Communication | ||||
| Interface | RS-485 | |||
| Bias Resistor | No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) | |||
| Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) | |||
| Baud Rate | 1200 to 115200 bps | |||
| Protocol | DCON | Modbus RTU, DCON | ||
| Dual Watchdog | Ye*odule (1.6 Seconds), Communication (Programmable) | |||
| LED Indicator/Display | ||||
| System LED Indicator | Yes, 1 as Power/Communication Indicator | |||
| I/O LED Indicator | - | |||
| 7-Segment LED Display | - | |||
| Isolation | ||||
|
I*a-Module Isolation, Field-to-Logic |
3000 VDC | |||
| EMS Protection | ||||
| ESD (IEC 61000-4-2) | &plu*n;4 kV Contact for each Terminal | |||
| EFT (IEC 61000-4-4) | &plu*n;4 kV to Power | |||
| Surge (IEC 61000-4-5) | &plu*n;0.5 kV for Power Line | |||
| Power | ||||
| Reverse Polarity Protection | Yes | |||
| Input Range | +10 ~ +30 VDC | |||
| C*umption | 1.0 W | |||
| Mechanical | ||||
| Dimensi* (L x W x H) | 123 mm x 72 mm x 35 mm | |||
| Installation | DIN-Rail or Wall Mounting | |||
| Environment | ||||
| Operating Temperature | -25 to +75°C | |||
| Storage Temperature | -40 to +85°C | |||
| Humidity | 10 to 95% RH, Non-condensing | |||
| M-7017-G CR | 8路模拟量输入模块，灰色，同时支持Modbus/RTU和DCON协议 |
| M-7017C-G CR | 8通道模拟量输入模块 |
| M-7017R-G CR | 8路高保护模拟量输入模块，灰色，支持高速模式，同时支持Modbus/RTU和DCON协议 |
| M-7017R-A5-G CR | 8路高电压输入模块 |
| M-7017RC-G CR | 8通道电流输入模块 |
| M-7017RMS-G CR | 8通道True RMS输入模块 |
| M-7017Z-G CR | 10/20通道电压电流高保护输入模块 |
| M-7018-G CR | 8路热电偶(J、K、T、E、R、S、B、N、C型)/6（差分）2（单端）输入模块，灰色，同时支持Modbus/RTU和DCON协议 |
| M-7018R-G CR | 8路高保护热电偶(J、K、T、E、R、S、B、N、C型)输入模块，灰色，支持断线检测功能，同时支持Modbus/RTU和DCON协议 |
| M-7018Z-G/S CR | 10路高保护热电偶输入模块(带DB-1820端子板)，同时支持Modbus/RTU和DCON协议 |
| M-7018Z-G/S2 CR | 10路高保护热电偶输入模块(带DN-1822 CR和 CA-252518D)，同时支持Modbus/RTU和DCON协议 |
| M-7019R-G CR | 8通道高保护通用模拟输入模块 |
| M-7019Z-G/S CR | 10通道通用模拟输入模块，包括M- 7019Z和DB-1820 |
供货与配送
关于货期：本型号产品为全新！！正常供货期为3个工作日。
产品线：PAC系列|分布式I/O|PC based I/O板卡|工业通讯产品|工业自动化运动控制|HMI平板/组态软件|物联网IO模块
