铝阳****氧化****回收酸减少酸浪费的新工艺
回收无机酸树脂
矮床酸阻滞回收酸用离子交换树脂<*n style="color:#FF0000;"> Tulsion® A-32 Fine mesh
ISO-9001/ISO-14001/OHSAS-18000
"坚韧胶凝体"精细型强碱性阴离子交换树脂II型
<*n style="color:#FF0000;">Tulsion® A-32 Fine mesh 是一款包含季胺II型官能团的聚苯乙烯架构的“坚韧胶凝体”强碱型精细型阴离子交换树脂。由于本身的无裂纹特性而具有优良的物理特性，比I型树脂的碱性稍 低，因此在和I型树脂有相同的再生程度的时候，有更高的再生效率和操作能力。主要应用在盐酸，*，*，qingfu酸等回收，再生只需用纯水冲洗即可回收得到 酸，由于其细粒以及矮床特性使得其可以回收得到15-20%左右的酸溶液，因此在不锈钢酸洗，制糖业回收酸等行业广泛利用，并受到一致好评。
|
<*n style="background-color:#C0C0C0;">基本性质/ TYPICAL CHARACTERISTICS |
|
|
型式/ Type |
: 强碱型阴离子交换树脂/Strong Base Anion Exchange Resin |
|
结构/ Matrix structure |
: 聚苯乙烯共聚物/Polystyrene copolymer |
|
官能基/ Functional group |
: 季胺II型/Quatemary Ammonium Type II |
|
物理型式/ Physical form |
: 含水球状/ Moist spherical beads |
|
离子型式/ Ionic&nb*s shipped |
: 氯型/Chloride |
|
粒径分布/ Screen size USS(wet) |
: 50 - 140 |
|
粒径大小/ Particle size |
: 0.1 - 0.3mm |
|
总交换容量/Total Exc. Capacity |
: 1.3 meq/ml (H+) |
|
膨胀系数/ Swelling&nb*pprox.) |
: Cl- to OH- 12% |
|
含水份/ Moisture |
: 47±3% |
|
pH 作范围/ Suitable pH range |
: 0 to 14 |
|
溶解率/Solubility |
: 不溶解于任何溶剂/ Insoluble in common solvents |
|
逆洗沉降密度 |
: 690 - 720 g/L |
|
<*n style="background-color:#C0C0C0;">建议操作条件 / OPERATING CONDITI* |
|
|
树脂床高度/Resin bed depth |
600 mm(24″) |
|
*大操作温度 |
: 60℃ |
|
*大流速/ Maximum Service flow |
:60 BV/hr |
|
逆洗膨胀空间 |
: 50 to 70% |
|
逆洗流速 |
: 5-10 BV/hr |
<*n style="background-color:#C0C0C0;"> 水力特性（HYDRAULIC CHARACTERISTICS）： <*n style="color:#FF0000;">Tulsion® A-32 Fine mesh
<*n style="background-color:#C0C0C0;"> 测试（TESTING）： <*n style="color:#FF0000;">Tulsion® A-32 Fine mesh
离子交换树脂的抽样和测试是按标准的测试程序，即ASTMD - 2187和IS - 7330，1998.
<*n style="background-color:#C0C0C0;"> 包装（PACKING）： <*n style="color:#FF0000;">Tulsion® A-32 Fine mesh
|
Super Sack |
1000 lit |
Super Sack |
35 cft |
|
MS drums |
180 lit. |
MS drums |
7 cft |
|
HDPE lines Bags |
25 lit. |
HDPE lines Bags |
1 cft |
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets *ailable at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
若需要更多资料，请与我公司技术人员联系！
