水泵是输送液体或使液体增压的机械。它将原动机的机械能或其他外部能量传送给液体,使液体能量增加,主要用来输送液体包括水、油、酸碱液、乳化液、悬乳液和液态金属等。
也可输送液体、气体混合物以及含悬浮固体物的液体。水泵性能的技术参数有流量、吸程、扬程、轴功率、水功率、效率等;根据不同的工作原理可分为容积水泵、叶片泵等类型。容积泵是利用其工作室容积的变化来传递能量;叶片泵是利用回转叶片与水的相互作用来传递能量,有离心泵、轴流泵和混流泵等类型。
使用与*:Use And
Maintenance
1、经常检查轴承温度,混流泵,轴承箱内应装70%的钙基黄油,12尺混流泵,不得过多或过少,轴承升温一般不得比周围超过35°C,轴承的****限温度不得超过75°C(用手摸感到烫手),400HW-7混流泵 ,若超过应停车检查原因予以消除。
Check the bearing temperature
regularly.The bearing box should be put 70% butter,it can not be too much or
too little.The temperature rising of bearing can not be more than 35°C higher
than around temperature and the limiting temperature of bearing is 75°C,if the temperature is higher than 75°C, stop to check the reason and adjust it.