PC ABS CH210VT PC ABS CH210VT

PC/ABS CH210VT

Plastic ABS is no*xic and tasteless, and its appearance is ivory color semitran*re*r tran*rent particles or powdery. The density of 3 1.05~1.18g/ cm, the co*action rate was 0.4%~0.9%, elastic modulus 2Gpa, Poiss*ratio is 0.394, the hygroscopicity of <1%, the melting temperature of 217~237 DEG C, the thermal decom*ition temperature of >250 DEG C.

mechanical property

Plastic ABS has excellent mechanical properties and excellent impact strength. It can be used at very low temperature. The wearability of plastic ABS is excellent, its dimensional stability is good, and its oil resistance is good. It can be used for bearings under moderate load and low speed. The vermicular resistance of ABS is larger than that of PSF and PC, but *aller than that of PA and POM.

Thermal Properties

The thermal deformation temperature of the plastic ABS is 93~118 C, and the products can also be raised about 10 degrees C after annealing. ABS can still show a certai*ughness at -40 C, and can be used in the temperature range of -40~100 C.

Electrical properties