11、磨机衬板被磨损70%或有 70mm长的裂纹时应更换。
12、衬板螺栓有损坏造成衬板松动时应更换。
13、主轴承严重磨损时应更换。
14、格子式球磨机的篦子板磨损到不能再焊补时应更换。
15、大齿轮齿轮面磨损到一定程度后可翻面继续使用。
16、小齿轮严重磨损应更换。
For fine comminution of dry laboratory samples or solids in suspension. For homogenisation of emulsi* or pastes.
The Vibratory Micro Mill PULVERISETTE 0 is recommended for sample preparation of RoHS tests (Restriction of Hazardous Substances).
折叠检修规程(一)、检修周期:
1、经修1个月;
2、小修1--3个月;
3、中修12--24个月;
4、大修60--120个月。
(二)、检修内容:
1、经修:主要检查油量、调整各部间隙,坚固各部螺栓,更换个别衬板或检查衬板磨损情况,中标球磨机,修补进料器。
2、小修:检查清洗测量齿面磨损情况,检查衬板磨损情况,必要时更换。
3、中修:更换进料部分零件,更换传动小齿转轮和轴承,减速箱解体检查。大齿轮在运行3--5年可根据情况调整使用,中空轴运行3--5年应进行测量。
4、大修:解体检查清洗、测量,根据磨损情况,修理或更换大齿轮、中空轴、球面瓦、传动轴、小齿轮及筒体,海南球磨机,修理更换电器元件,电器设备大修后,必须进行试运行验收工作。
For fine comminution of dry laboratory samples or solids in suspension. For homogenisation of emulsi* or pastes.
The Vibratory Micro Mill PULVERISETTE 0 is recommended for sample preparation of RoHS tests (Restriction of Hazardous Substances).
关于叫叶片的零件,招*球磨机,一般不是主要部件,在进料端的部件进料口内有内螺旋可称其内螺旋叶片,在出料端的部件出料口内有内螺旋也可称其内螺旋叶片。
另外在出料端的辅助设备中如果用螺旋运输机,在该设备里会有叫螺旋叶片的零件,但是严格的说,球磨机哪家好,它已经不算球磨机的零件了。The FRITSCH Vibratory Micro Mill PULVERISETTE 0 grinds your sample through impact and friction by which the mortar vibrates electromagnetically and the grinding material transfers the vibrati* to the grinding ball. At the beginning of the grinding, the comminution of the coarse particles is achieved by the impact effect of the grinding ball. Next, the fine particles are comminuted through friction by the tumbling motion of the grinding ball as the vibrati* subside. The impact energy of the grinding ball is freely adjustable thus, allowing it to be precisely adapted to the sample bein*round.