FT-301系列智能粉末电阻率测试系统
FT-301 Series intelligent powder resistivity test system (upgrade)
一、概述Overview:
采用一体化结构设计,将粉末比电阻的测量与粉体电阻率/电导率分析为一体,测量与数据分析全部通过PC软件完成,粉体压强与电阻值、电阻率、电导率值的变化关系;粉体受到压缩直至平稳时,描述了粉体在压缩体积变化过程中,电性能的变化趋势,还可描述粉体压缩后压力减少过程中粉体因自身特性内聚力反弹形变或恢复过程变化曲线图谱;采用全自动操作模式运行,自动数据分析与管理。四端法测量模式。
the integrati*tructure design the powder ratio resistance measurements and powder resistivity/conductivity ysis for one-piece measurement and data ysis was done by the PC software The change relati*hip between the powder pressure and resistance the resistivity and the conductivity; Powder is compressed until ooth describes the changing trend of the electrical properties in the process of compression volume. Using autotic operation mode autotic data ysis and nagement. Four terminal method of measurement.
二、适用范围Scope of application:
需要对电性能进行分析的导电性粉末,如:锂电池材料、石墨烯、石墨类、碳素粉末、焦化、石化、粉末冶金等生加工企业部门;高等院校、科研部门,质量检验机构,质量管理部门,研发部门等。
to yze the electrical conductive powder such as: carbon powder plant coking plant petrochemical plant powder metallurgy factory etc production and processing enterprises sector; university scientific research department quality inspection organization quality nagemen*partme*d department etc.
三、技术参数资料Technical Parameters
规型号model
FT-301A
FT-301B
FT-301C
FT-301D
1.电阻resistance
10-8~2×105Ω
10-7~2×107Ω
10-6~2×106Ω
10-5~2×106Ω
2.电阻率范围Resistivity
10-8~2×105Ω-cm
10-7~2×107Ω-cm
10-6~2×106Ω-cm
10-5~2×106Ω-cm
3.电导率Conductivity
5 ×10-5~108s/cm
5×10-7~107s/cm
5×10-6~106s/cm
5×10-6~105s/cm
4.测试电流范围 current
0-10A,100uA
1μA,10μA,100μA,1mA,10mA,1000mA
5.测量电压量程 Voltage
0-2v;分辨率0.1Uv
精度Accuracy 0.1%
电压量程voltage:2mV 分辨率20mV 200mV 2V Resolution:0.1uV 测量精度±(0.1%)
6.电流精度Current Accuracy
±0.1%
±0.1%
±0.2%
7.电阻精度Resistance Accuracy
≤0.3%标准电阻standard resistance
分辨率0.01μΩ
≤0.3%标准电阻standard resistance
分辨率0. 1μΩ
8.PC软件界面display
电阻值、电阻率、电导率值、温度、压强值、单位自动换算、横截面、高度、曲线图谱、报表等.
resistance resistivity conductivity temperature pressure value the unit autotically conversion cross-section height
9.样品高度Sample height
样品高度范围:0.000-10.000mm,测量分辨率0.001mm,
可测样品压缩厚度0.1mm
Sample height range: 0.000-10.000mm measureme*esolution 0.001mm the minimum measurable sample compression thickness 0.1mm
10.温湿度范围
Temperature humidity range
常温-50度;湿度:20%-98%/
Room temperature -50 degrees humidity:20%-98%
11.恒压时间
time setting
0-99.9S
12.标配标准件Standard Parts
a.标准校准电阻1个;b.标准高度校准件1个
a. standard calibration resistance 1; b. standard height calibration 1
1. 测试方式
Test mode
a.四端测量法Four-terminal measurement method
b.自动测量Autotic measurement
14.传感器压力Pressure Sensors
200kg;(其他规可以定制)
15.粉末模具Powder Mold
模具Mold:内径inner diameter 10mm; 20mm;*eight 25mm ;(选购choose to buy)
16.加压方式Pressurized way
自动Autotic
17.脱模方式Stripping mode
自动Autotic
18.电****材质Electrode
紫铜Copper terial
19.吸尘系统
Vacuuming system
外置吸尘处理External dust treatment
20.整机不确定性误差
3%;重复性误差2%以内.(因不同材料本身特性因素影响,误差不一致,人为因数除外)
21.工作电源power supply
输入: AC 220V±10% 50Hz 功 耗:Input: AC220V ± 10% 50Hz Power c*umption: 22. 主机外形尺寸dimensi*
约About:H700mm*L650mm*D300mm
23.净重量
Net Weight
约About 45kg
24. 标配外选购Others buy
a.电脑和打印机依据客户要求配置; b.计量1份 c.水分仪 d.密度仪
a*puters and printers based on customer configuration requirements.
b. Measurement certificate 1. c. moisture meter d. true density meter