东莞市乐睿贸易有限公司

主营:PC

TPE-挤出型TPE

面议 中国 广东 北京

产品属性

良好的加工性能 通用
良好的流动性 脱模性能良好
用途  电器用具 汽车领域的应用 消费品应用领域
工业应用 通用
RoHS 合规性  RoHS 合规
外观  黑色
形式  粒子
加工方法  成型
物理性能 额定值 单位制 测试方法
密度 / 比重 1.17 g/cm³ ISO 1183
硬度 额定值 单位制 测试方法
肖氏硬度 2 (邵氏 A, 10 秒, 23°C, 注塑) 65 ISO 7619
弹性体 额定值 单位制 测试方法
拉伸应力 3 (断裂, 23°C, 2.00 mm) 6.5 MPa ISO 37
伸长率 3 (断裂, 23°C, 2.00 mm) 650 % ISO 37
压缩*变形 ISO 815
23°C, 72 hr 19 %
70°C, 22 hr 42 %
100°C, 22 hr 80 %
额定值 单位制
建议的回制料比例 20 %
料筒后部温度 165 到 175 °C
料筒中部温度 175 到 195 °C
料筒前部温度 185 到 225 °C
射嘴温度 195 到 225 °C
模具温度 20 到 40 °C
背压 2.00 到 10.0 MPa
螺杆转速 40 到 100 rpm
说明
Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP).

Regrind levels up to 20% can be used with Bergaflex™ BFI 65A-312 black SO4 with minimal property losses, provided that the regrind is free of
contamination. To minimize losses during molding, the melt temperature should be as low as *sible. The final determination of regrind
effectiveness should be determined by the customer.

Bergaflex BFI 65A-312 black SO4 has excellent melt stability. Maximum residence time*ay vary, depending on the size of the barrel. Generally,
the barrel should be emptied if it is idle for periods of 8-10 minutes or longer.
*uvTPE
*发黄TPE
*黄变TPE
*撕裂TPE
****TPE
密度低TPE
耐低温TPE
耐腐蚀TPE
耐高温TPE
耐化学TPE
耐黄变TPE
耐老化TPE
*级TPE
*损TPE
耐水解TPE

医用TPE-TPE聚酯(东莞市乐睿贸易有限公司)TPE橡胶-TPE型号
内容声明:第一枪网为第三方互联网信息服务提供者,第一枪(含网站、微信、百家号等)所展示的产品/服务的标题、价格、详情等信息内容系由卖家发布,其真实性、准确性和合法性均由卖家负责,第一枪网概不负责,亦不负任何法律责任。第一枪网提醒您选择产品/服务前注意谨慎核实,如您对产品/服务的标题、价格、详情等任何信息有任何疑问的,请与卖家沟通确认;如您发现有任何违法/侵权信息,请立即向第一枪网举报并提供有效线索至b2b@dyq.cn