HY-305滑度仪
一、适用范围:
本机是把400g砝码加在笔夹上,把计数表调到零,开动电机,铅芯在铜板上旋转摩擦到100圈时,打开记录器,开始画线记录,待记录器旋转一周后把电机关上。
This device is used to install the 400g weight on the pen clip,and adjust the count instrument to zero,power on the instrument,when the core rotating on the copper board and ru*ing for 100 turns,enable the recorder to record the line drawing,power off the instrument when the record turning a circle.
二、标准依据:
本依器符合标准QB/T 2774-2006条款5.4。
三、技术参数:
砝码Load |
400g |
芯尖规板Tip fender |
0.7mm孔径hole diameter |
砂纸Abrasive paper |
W14金相砂纸metallographic abrasive paper50张 |
坐标纸固定夹具Coordinate paper fixing clamping |
一套Set |
坐标记录纸Coordinate recording paper |
一包Package |
重量Weight |
60kg |
电源Power |
AC220V 50Hz |
体积Dimension(W×D×H) |
500×300×650mm |
四、附件:
1.仪器中文操作说明书一份
2.仪器保修卡一份
3.国际第三方CNAS试验室仪校报告一份