概述

The PR 6201 range of load cells is specially designed for weighing silos, tanks and process vessels. The unique design principle, in combination with the FlexLock installation kit*akes it *sible to counterbalance movements arising from mechanical or thermal expansion or co*action of the vessel or its supporting c*truction. A particular design characteristic is that the overall height and shape of the load cell remain unchanged, even after two decades of use. Alongside this, the unit has an especially high overload capacity of up to 200%.

特性

500kg… 50t Type LA/L/D1/C3

1. Easy to install

2. Full stainless steel housing

3. Wide temperature range

4. High overload capacity

5. Resistant against vibrati*

6. Hermetically sealed, IP 68 (depth of 1.5m for 10,000 hrs.), IP 69K

7. 4 to 20mA output signal as option (LA version)

8. Best overvoltage protection

9. Ex-version *ailable (PR 6201/..E)

参数

Accuracy class 0,25 0,25 0,04 0,015 % Emax

Minimum dead load lowest limit of specified measuring range Emin 0 0 0 0 % Emax

Maximum capacity highest limit of specified measuring range Emax s. table s. table s. table s. table

Minimum LC verification minimum load cell verification interval,

vmin = Emax/Y Y 5.000 14.000

interval for Emax = 1,000kg Y 4.000

for Emax = 500kg Y 2.000

Rated output relative output at nominal load Cn 16mA 1 1 1 mV/V

for Emax = 50t Cn 16mA 2 2 2 mV/V

Tolerance on rated output permissible deviation from rated output dc < 1.0 < 1.0 < 0.25 < 0.07 % Cn

Zero output signal load cell output signal under unloaded condition Smin 4mA < 2.0 < 1.0 < 1.0 % Cn

Repeatability error max. change in load cell output

for repeated lo*g εR < 0.02 < 0.02 < 0.01 < 0.005 % Cn

Creep, durin*0 min. max. change in load cell output

under nominal load dcr < 0.05 < 0.05 < 0.03 < 0.015 % Cn

Non-Linearity max. deviation from best straight line through zero dLin < 0.25 < 0.25 < 0.03 < 0.01 % Cn

Hysteresi*ax. difference in load cell output dhy < 0.25 < 0.25 < 0.04 < 0.015 % Cn

订货型号

Nominal Version Max. usable load Destructive load Packing Weight

Type Load Emax (in % of Emax) (in % of Emax) gross/net

PR6201/52 500kg LA/L/D1/D1E (LA:120) 200 > 500 240 x 240 x 155mm 2,8kg/1,9kg

PR6201/13 1t LA/L/D1/D1E (LA:120) 200 > 500 240 x 240 x 155mm 2,8kg/1,9kg

PR6201/23 2t LA/L/D1/C3/D1E/C3E (LA:120) 200 > 500 240 x 240 x 155mm 2,8kg/1,9k*

PR6201/33 3t LA/L/D1/C3/D1E/C3E (LA:120) 200 > 500 240 x 240 x 155mm 2,9kg/2,0kg

PR6201/53 5t LA/L/D1/C3/D1E/C3E (LA:120) 200 > 500 240 x 240 x 155mm 2,9kg/2,0kg

PR6201/14 10t LA/L/D1/C3/D1E/C3E (LA:120) 200 > 500 240 x 240 x 155mm 3,4kg/2,5kg

PR6201/24 20t LA/L/D1/C3/D1E/C3E (LA:120) 200 > 500 240 x 240 x 155mm 5,1kg/4,2kg

PR6201/34 30t LA/D1/C3/D1E/C3E (LA:120) 200 > 500 240 x 240 x 155mm 5,5kg/4,6kg

PR6201/54 50t LA/L/D1/C3/D1E/C3E (LA:120) 150 > 300 240 x 240 x 155mm 5,1kg/4,2kg

选配

Type Description Dimensi* Order number

PR6130/08 Plastic Cable junction box for all industrial applicati*, max. 8 load cells 250 x 180 x 90mm 9405 361 30081

PR6130/04 Cable junction box Aluminium, grey painted, IP 68, for all industrial 175 x 80 x 57mm 9405 361 30041

applicati*, max. 4 load cells

PR6130/64 Stainless steel material stainless steel 1.4301, IP 68, IP 69K, 195 x 114 x 59mm 9405 361 30642

cable junction box for all industrial, i*insically safe and W&M applicati*,

max. 4 load cells

PR6130/68 Stainless steel material stainless steel 1.4404, IP 68, 200 x 160 x 60mm 9405 361 21682

cable junction box for all industrial, applicati*, max. 8 load cells

PR6135 Extension cable for all applicati* D = 9mm 9405 361 35. . 2

PR6135/…A Extension cable, armoured for all applicati* D = 11mm 9405 361 35. . 9

PR6136 Extension cable for i*insically safe applicati*, blue D = 11mm 9405 361 36. . 2

PR6136/…A Extension cable, armoured for i*insically safe applicati*, blue D = 11mm 9405 361 36. . 9

PR6143/50N Loaddisk normal version for 0.5 up to 50t 9405 361 43501

PR6143/50S Stainless steel Loaddisk material 1.4542 (DIN 17440) for 0.5 up to, 50t 9405 361 43502

PR6143/24S Stainless steel Botto*sk material 1.4542 (DIN 17440) for PR 6201

up to 10t nominal load 9405 361 43242

PR6143/54S Stainless steel Botto*sk material 1.4542 (DIN 17440) for

PR 6201 20t, 30t or 50t nominal load 9405 361 43542

PR6145/00N Mounting kit steel plates to mount all PR 6201 up to 50t nominal load 9405 361 45001

PR6145/00S Stainless steel Mounting kit material 1.4301, for 20t D1, 20t C3, 30t or 50t

nominal load order PR 6143/54S separately 9405 361 45002

PR6143/00N Mini Flexlock mounting plate kit with built in c*trainer

up to 25kN horizontal forces 9405 361 43001

PR6143/00S Stainless steel Mini Flexlock material 1.4301, up to 20 t nominal load and 9405 361 43002

up to 25kN horizontal forces

PR6143/10N Flexlock stronger version with built in c*trainer

up to 50kN horizontal forces 9405 361 43101

PR6143/10S Stainless steel Mini Flexlock material 1.4301, up to 50t nominal load and

up to 50kN horizontal forces 9405 361 43102

PR6152/02 Horizontal c*trainers withstands horizontal forces up to 200kN 9405 361 52021