价格说明

此价格为含税价格，订单中税费无需*统计。其他综合需求，请与我们联系。

联系电话：021-60517870、31230678、18516008375

 武汉、郑州两地仓库发货！

I-7018R 电路高保护，支持断线开路检测功能！！

 I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial co*ol system. The product line includes sensor-tocomputer, computer-to-sensor, digital I/O, timer/counter, RS-232 to RS-485 converter, USB to RS-485 converter, RS-485 repeater, RS-485 hub and RS-232/422/485 to Fiber Optics. I-7000 supports DCON protocol, and M-7000 modules support Modbus RTU and DCON protocols. Many SCADA/HMI software and PLCs support Modbus RTU protocol. It is easy for them to integrate with M-7000 modules

.

The I-7018/M-7018 is an 8-channel Analog Input module that provides current and voltage input, as well as thermocouple input. The I-7018R/M-7018R is an upgraded version of the I-7018/M-7018 that includes an extremely high-quality protection mechani* where the overvoltage protection can be as high as 240 Vrms. The I-7018R/M-7018R i*ore suitable for critically harsh environments, and the newly-added open thermocouple detection feature makes the I-7018R/M-7018R more attractive than ever. The I-7018/M-7018/I-7018R/M-7018R also features 4 kV ESD protection and 3000 VDC i*a-module isolation. The specificati* for the M-7018 and M-7018R are the same as the I-7018 and I-7018R, but provide additional support for the Modbus RTU protocol as well as the DCON protocol.   模拟量输入     输入通道 8差分   输入类型 热敏电阻   热敏电阻  +/-15 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1V, +/-2.5V, +/-20 mA（需外部接125Ω电阻）热电偶( J, K, T, E, R, S, B, N, C, L, M)       分辨率 16-bit   采样率 10次/秒   精度  +/-0.1% of F.S.R.   带宽 15.7 Hz   零点*移 +/-10 μV/°C   跨度*移 +/-25 ppm/°C   波特率 15.7 Hz   共模* 86 dB min.   差模* 100 dB   输入阻* >400k Ω   过压保护 240 Vrms   热电偶开路检测 √   ESD保护  +/-4 kV (连接到没一个通道)   隔离电压 3000 VDC   接口     接口 RS-485   格式 N, 8, 1   波特率 1200 ~ 115200bps   LED显示     1路LED作电源/通讯指示用   电源     输入 +10 VDC ~ +30 VDC   功耗 1.8 W   工作环境     工作温度 -25 °C ~ +75 °C   存储温度 -40 °C ~ +85 °C   湿度 10 ~ 95% RH, 无冷凝

Models I-7018 I-7018R M-7018 M-7018R Analog Input Channels 6 Differential and 2 Single-ended, or 8 Differential 8 Differential 6 Differential and 2 Single-ended, or 8 Differential 8 Differential Wiring Differential Sensor Types Thermocouple J, K, T, E, R, S, B, N, C Voltage &plu*n;15 mV, &plu*n;50 mV, &plu*n;100 mV, &plu*n;500 mV, &plu*n;1 V, &plu*n;2.5 V Current &plu*n;20 mA, 0 ~ +20 mA, +4 ~ +20 mA (requires an optional external 125 Ω resistor) Resolution 16-bit Accuracy 0.1% of FSR Sampling Rate 10 Hz (Total) Input Impedance > 400 kΩ Common Voltage Protection 25 VDC 200 VDC 25 VDC 200 VDC Individual Channel Configuration - Overvoltage Protection &plu*n;80 VDC 240 Vrms &plu*n;80 VDC 240 Vrms Open Wire Detection (for thermocouple only) - Yes - Yes Temperature Output C*istency - Stable Temperature Output in the Field - Note: For highly-accurate thermocouple measurement, ICP DAS recommends selecting the I-7018Z/I-7019Z module,which features automatic cold-junction compensation for each channel, ensuring c*istent and stable temperature output. Models I-7018 I-7018R M-7018 M-7018R Communication Interface RS-485 Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) Baud Rate 1200 to 115200 bps Protocol DCON Modbus RTU, DCON Dual Watchdog Ye*odule (1.6 Seconds), Communication (Programmable) LED Indicator/Display System LED Indicator Yes, 1 as Power/Communication Indicator I/O LED Indicator - 7-Segment LED Display - Isolation I*a-Module Isolation, Field-to-Logic 3000 VDC EMS Protection ESD (IEC 61000-4-2) &plu*n;4 kV Contact for each Terminal EFT (IEC 61000-4-4) &plu*n;4 kV to Power Surge (IEC 61000-4-5) &plu*n;0.5 kV for Power Line Power Reverse Polarity Protection Yes Input Range +10 ~ +30 VDC C*umption 1.0 W Mechanical Dimensi* (L x W x H) 123 mm x 72 mm x 35 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 to +75°C Storage Temperature -40 to +85°C Humidity 10 to 95% RH, Non-condensing