东莞博德莱仪器设备有限公司
特价销售杭州太阳镜片偏光仪 宝丽来试验机
产品属性
- 讀數度盤:
- -15-+15°
- 品牌:
- 其他
- 类型:
- 电子万能试验机
- 加工定制:
- 是
- 型号:
- BLD-301
- 测量范围:
- -15-+15°
- 测量精度:
- 1°
- 调速范围:
- -15-+15°
- 最大负荷:
- AC100~240V 50/60Hz
- 拉伸空间:
- 00
- 最大行程:
- 589nm
- 外形尺寸:
- 27×37×34 CM
- 重量:
- 10 Kg
偏振轴位测试仪技术参数
1.讀數度盤：-15-+15°
2.小讀數：1°
3.光源：鈉燈(589nm)
4.外形尺寸:27×37×34 CM(長×寬×高)
5.重 量:10 Kg
6.輸入*壓：
1. *正確之*源送上，**源**打*即可。
3. 測試眼鏡固定後，測試人員從*臺正前上方之長方型觀測孔，看其測試光源內上半圓與下半圓的光亮度是否相同；如果不同，則須調整兩光源下方之調整把手，使其兩光源上下之亮度相同，相同後看光源上方之兩指針各指於幾度，即是所測試出之結果。
产品优点：此产品可替代意大利 LEMA PA1 产品
The polarization axis bit tester technical parameters
1. The re*g of the dial: - 15 + 15 °
2. The minimum re*g: 1 °
Source: sodium lamp (589nm)
Appearance size: 27 * 37 * 34 CM (long * wide * height)
Weight: 10 Kg
Input voltage: AC100 ~ 240V 50/60hz
The polarization axis bit tester USES the instructi*
Put the right power on and turn on the power switch.
Place the required test glasses in the test *ition. It is the *ition of two plastic steel jig up and down in fro*f the light source. This fixture can adjust its Angle, its Angle should be in accordance with the picture frame arc and adjust the Angle, adjustment must be parallel to two light source, the distance must be the same after two eyes before.
3. Test glasses after fixation, the tester is from the machine before above the rectangular aperture, see its test under the light source on the circumference and semicircle brightness are the same; If different, the adjustme*f under the two light handle, make its two same brightness of light source fluctuation, look after the same light source in just a few degrees, two Pointers point to each of the above is that the result tested.
Product advantage: this product can replace the Italian LEMA PA1 product
